Uwell Caliburn G2 Replacement Coils

Buy Uwell Caliburn G2 Replacement Coils in UAE

Uwell Caliburn G2 Replacement Coils are replaceable coil heads designed for the CALIBURN G/G2 refillable pod platform. The complete compatible coil family includes 0.8Ω, 1.0Ω and 1.2Ω resistance options, allowing users to configure compatible CALIBURN devices for tighter MTL or more open restricted-DTL vaping. Uwell officially identifies the 0.8Ω and 1.0Ω versions as CALIBURN G coils, while the newer 1.2Ω Mesh version is specifically branded as a CALIBURN G2 coil.

Current UAE stock commonly sells these replacement coils in a 4-piece pack, with the dedicated G2 1.2Ω option currently listed at approximately 9–13W by UAE retailers. The coils use a simple press-fit installation inside compatible empty G/G2 cartridges, allowing the heating element to be replaced without discarding the entire refillable pod.

Key Details

• Brand: Uwell

• Product: CALIBURN G / G2 Replacement Coils

• Product Type: Replaceable coil head

• Pack Size: Commonly 4 coils per pack in UAE

• Compatible Resistance Options: 0.8Ω, 1.0Ω, 1.2Ω

• 0.8Ω: FeCrAl UN2 Meshed CALIBURN G Coil

• 1.0Ω: FeCrAl CALIBURN G Coil

• 1.2Ω: FeCrAl UN2 Meshed CALIBURN G2 Coil

• 0.8Ω Style: Looser MTL / RDL

• 1.0Ω Style: Balanced MTL

• 1.2Ω Style: Tighter MTL

• Installation: Press-fit / push-fit

• Refillable Pod Required: Yes

• Coil Integrated Into Pod: No

• E-Liquid Included: No

• Nicotine Included: No

Uwell's official GK2, CALIBURN X and GZ2 specifications independently confirm the same three-coil family: 0.8Ω G Mesh, 1.0Ω G and 1.2Ω G2 Mesh.

Important: G2 Coil vs G-Compatible Coils

The naming can be confusing.

Only the 1.2Ω Mesh coil is officially labelled by Uwell as:

CALIBURN G2 Coil

The two other compatible options are officially named:

• 0.8Ω CALIBURN G Coil

• 1.0Ω CALIBURN G Coil

However, both CALIBURN G coils are officially compatible with the CALIBURN G2 system. Uwell's current G2 information specifically states that the device is compatible with the original CALIBURN G 0.8Ω and 1.0Ω coils.

For a UAE Shopify product with all three variants, the clean title can remain:

Uwell Caliburn G2 Replacement Coils

with variants:

0.8Ω | 1.0Ω | 1.2Ω

But the specification section should accurately explain the official G/G2 naming.

1.2Ω Uwell Caliburn G2 Mesh Coil

The 1.2Ω option is the dedicated CALIBURN G2 coil.

Uwell officially identifies it as:

FeCrAl UN2 Meshed 1.2Ω CALIBURN G2 Coil.

This higher-resistance coil is designed toward a tighter mouth-to-lung configuration and lower vapour output compared with the 0.8Ω option. Uwell's own G2 product information specifically says the 1.2Ω Meshed coil works well with stronger salt-nicotine liquids, while the lower-resistance 0.8Ω option produces more vapour.

Current UAE stock lists the 1.2Ω G2 coil at approximately:

9–13W.

Some international retailers list approximately 8–12W, so the printed wattage information on your physical coil box should be treated as the final reference if it differs.

1.2Ω Characteristics

The 1.2Ω option generally provides:

• Tighter MTL airflow

• Lower vapour volume

• Cooler operation

• Lower e-liquid consumption

• Lower battery demand

• Suitability for compatible MTL formulations

Uwell positions the 1.2Ω coil as the higher-resistance choice within its G2 family.

0.8Ω Uwell Caliburn G Mesh Coil

The 0.8Ω option is officially a CALIBURN G coil but is fully supported by the CALIBURN G2 system.

Its official designation is:

FeCrAl UN2 Meshed 0.8Ω CALIBURN G Coil.

Uwell describes the 0.8Ω option as providing smoother airflow and greater vapour production than its higher-resistance alternatives.

Current replacement-coil sellers commonly rate the 0.8Ω version around:

13–18W.

The 0.8Ω coil is therefore the more open option for users who want:

• More vapour

• Warmer output

• Looser MTL

• Restricted DTL

• More airflow

compared with the 1.2Ω G2 configuration.

1.0Ω Uwell Caliburn G Coil

The 1.0Ω option is also an original CALIBURN G coil officially supported across multiple later G2-family devices.

Uwell identifies it as:

FeCrAl 1.0Ω CALIBURN G Coil.

Unlike the 0.8Ω and 1.2Ω versions, Uwell does not describe the 1.0Ω version as UN2 Meshed in its official current device specifications. This is important because some retailer listings incorrectly call every G/G2 resistance a Mesh coil.

Current retailer guidance commonly places the 1.0Ω version at approximately:

10–15W.

The 1.0Ω coil provides a middle option between 0.8Ω and 1.2Ω.

0.8Ω vs 1.0Ω vs 1.2Ω

Coil	Official Uwell Name	Build	Typical Style
0.8Ω	CALIBURN G Coil	UN2 Meshed	Loose MTL / RDL
1.0Ω	CALIBURN G Coil	Standard FeCrAl	MTL
1.2Ω	CALIBURN G2 Coil	UN2 Meshed	Tight MTL

Uwell officially confirms these construction names and compatibility across the GK2, CALIBURN X and GZ2 platforms.

Common Retailer-Listed Wattage Guide

Resistance	Commonly Listed Range
0.8Ω Mesh	13–18W
1.0Ω	10–15W
1.2Ω Mesh	Approximately 9–13W

The 0.8Ω and 1.0Ω wattage ranges are consistently published by current replacement-coil sellers, while the 1.2Ω range varies slightly between approximately 8–12W and 9–13W depending on source. Uwell's official G2 page itself specifies an 18W maximum device output but does not publish a dedicated wattage range for each coil on that page.

For Shopify, a safe specification is:

0.8Ω: 13–18W
1.0Ω: 10–15W
1.2Ω: Follow coil packaging; commonly listed around 9–13W

UN2 Mesh Technology

The 0.8Ω and 1.2Ω options use Uwell's UN2 Meshed heating construction. Uwell officially labels both coils as FeCrAl UN2 Meshed within current compatible-device specifications.

A mesh-style heating surface is designed to heat e-liquid across a broader area than a simple traditional wire configuration.

The practical performance depends on:

• Resistance

• Device output

• E-liquid

• Airflow

• Coil age

• Wicking condition

The 1.0Ω coil should be kept separate in the specification because Uwell lists it simply as a FeCrAl CALIBURN G Coil, not UN2 Mesh.

Pro-FOCS Flavor Technology

Uwell uses its Pro-FOCS flavour technology throughout the CALIBURN family. The manufacturer describes the technology as part of its approach to restoring and managing e-liquid flavour performance, and the original CALIBURN G/KOKO Prime coil platform explicitly associates its replaceable coils with Pro-FOCS.

Current UAE G2 coil listings also specifically associate the replacement coil system with Pro-FOCS technology.

Actual flavour performance still depends on:

• E-liquid formulation

• Coil condition

• Airflow

• Resistance

• Puff frequency

Pro-FOCS should therefore be treated as Uwell's coil/flavour platform rather than a guarantee that every liquid will taste identical across all configurations.

4 Coils Per Pack

Current UAE listings commonly sell CALIBURN G/G2 replacement coils in a 4-piece pack.

A current dedicated UAE CALIBURN G2 listing specifies:

Quantity: 4pcs/pack.

Other current UAE stores also list the complete G/G2 resistance family at 4 coils per pack.

For Shopify:

Pack Size: 4 Replacement Coils

is the strongest current UAE configuration.

Always check the physical package if your supplier uses another regional pack quantity.

Press-Fit Coil Installation

The CALIBURN G/G2 platform uses a press-fit coil installation system.

The replacement coil pushes into the base of the compatible empty cartridge rather than screwing into threads. Current G/G2 replacement listings describe the same push-fit design, and Uwell's original CALIBURN G instructions tell users to align the coil correctly with the locating slot before installation.

This design allows users to change only the heating element instead of replacing the complete pod.

How to Install a Caliburn G2 Replacement Coil

1. Remove the pod from the device.

2. Turn the cartridge so the coil base is accessible.

3. Pull the old coil straight out.

4. Check the locating shape on the replacement coil.

5. Align it correctly with the cartridge.

6. Push the coil firmly into position.

7. Refill the pod with compatible e-liquid.

8. Allow a fresh coil time to saturate.

9. Reinstall the pod.

10. Begin using the device at an appropriate output.

Correct coil alignment is important because Uwell specifically instructs users to match the coil with the locating slot when installing its CALIBURN G replaceable coils.

Prime a New Coil Before Use

A new coil contains dry wicking material.

After installing it and filling the pod, allow e-liquid time to saturate the wick before normal use.

Using a dry new coil can result in:

• Burnt taste

• Wick damage

• Reduced coil life

The amount of time required can vary according to liquid viscosity, but the important point is to avoid firing a new dry coil immediately.

Compatible With Uwell Caliburn G2

Yes.

The CALIBURN G2 officially supports:

• 1.2Ω G2 Mesh

• 0.8Ω G Mesh

• 1.0Ω G Coil

Uwell's own G2 documentation confirms backward compatibility with the 0.8Ω and 1.0Ω CALIBURN G coils in addition to the newer 1.2Ω G2 coil.

Compatible With Uwell Caliburn GK2

Yes.

Uwell officially specifies the CALIBURN GK2 with all three:

• 1.2Ω CALIBURN G2 Mesh Coil

• 0.8Ω CALIBURN G Mesh Coil

• 1.0Ω CALIBURN G Coil

The 1.2Ω and 0.8Ω are supplied with the original GK2 kit, while the 1.0Ω is listed as sold separately.

Compatible With Uwell Caliburn X

Yes.

The CALIBURN X officially supports the same three-coil family:

• 0.8Ω CALIBURN G Mesh

• 1.2Ω CALIBURN G2 Mesh

• 1.0Ω CALIBURN G

Uwell publishes this compatibility directly on the CALIBURN X specification page.

Because the CALIBURN X provides 5–20W adjustable output, it gives users more direct control over wattage within the compatible coil family's operating range.

Compatible With Uwell Caliburn GZ2

Yes.

Uwell officially lists the CALIBURN GZ2 with:

• 0.8Ω G Mesh

• 1.2Ω G2 Mesh

• 1.0Ω G Coil

and a maximum output of 17W.

Compatible With Uwell Caliburn Tenet

Yes.

The CALIBURN TENET officially includes 0.8Ω and 1.2Ω coils and supports the 1.0Ω CALIBURN G Coil as an additional option. Uwell positions the three resistance choices around both MTL and restricted-DTL use.

Compatible With Uwell Caliburn KOKO Prime

The CALIBURN KOKO Prime officially supports the CALIBURN G coil platform. Uwell originally paired it with 1.0Ω and 0.8Ω coils, while later KOKO Prime Vision specifications also list the 1.2Ω CALIBURN G2 coil as a separately sold compatible option.

Compatible With Uwell Caliburn Ironfist L

Yes.

Uwell's official CALIBURN & IRONFIST L documentation states that it supports:

• 0.8Ω

• 1.2Ω

• 1.0Ω CALIBURN G Coil

covering the same G/G2 replaceable coil family.

Wider Compatible Device Family

Based on current official Uwell specifications, the G/G2 coil ecosystem includes devices such as:

• CALIBURN G

• CALIBURN G2

• CALIBURN GK2

• CALIBURN GK2 Vision

• CALIBURN X

• CALIBURN GZ2

• CALIBURN TENET

• CALIBURN TENET KOKO

• CALIBURN KOKO Prime / Vision

• CALIBURN Ironfist L

Uwell's individual product pages repeatedly confirm use of the same 0.8Ω G, 1.0Ω G and/or 1.2Ω G2 coil architecture across this generation.

Always check the compatibility printed on your exact coil and device package before installation.

Not Compatible With Caliburn G3 Integrated Pods

The CALIBURN G3 uses a different cartridge system.

Uwell officially specifies the G3 with integrated-coil cartridges in 0.6Ω, 0.9Ω and 1.2Ω variants rather than the removable G/G2 coil heads used by the G2 generation.

Therefore:

CALIBURN G/G2 replacement coil ≠ CALIBURN G3 pod

The same distinction is important when shopping for later integrated-cartridge CALIBURN generations.

Replaceable Coil vs Integrated Pod

Feature	G/G2 Coil System	Newer Integrated Pod
Coil	Separate	Built into pod
When Coil Wears Out	Replace coil	Replace complete pod
Pod Can Be Reused	Yes, while undamaged	Not after coil wears
Installation	Press fit	Install complete cartridge
G2 Compatible	Yes	Different platform

The original G2 architecture is specifically built around a cartridge plus removable coil, while the later G3 generation moved to integrated-coil pods.

Which Resistance Should You Choose?

Choose 0.8Ω If You Prefer

• A more open draw

• More vapour

• Looser MTL

• Restricted-DTL use

• Lower resistance

Uwell specifically describes its 0.8Ω CALIBURN G coil as the more vapour-focused option within the G2 platform.

Choose 1.0Ω If You Prefer

• Balanced MTL

• Moderate vapour

• Mid-range resistance

• A middle option between 0.8Ω and 1.2Ω

Uwell describes its 1.0Ω KOKO/G coil setup as providing tighter airflow than the 0.8Ω version.

Choose 1.2Ω If You Prefer

• Tight MTL

• Lower vapour volume

• Higher resistance

• Lower-output operation

• Compatible stronger salt-nicotine formulations

Uwell specifically notes that the 1.2Ω G2 Mesh coil works well with stronger salts.

E-Liquid Compatibility

The G/G2 coil range is primarily a low-power MTL/RDL platform.

Independent current coil guidance commonly recommends 50/50 or higher-PG e-liquid for these resistance options, particularly compared with thick high-VG sub-ohm liquid.

The appropriate e-liquid still depends on:

• Resistance

• Nicotine strength

• Device

• Desired draw

If your e-liquid is unusually thick, check that it can wick properly through the installed coil.

Nicotine Salt Compatibility

The higher-resistance CALIBURN G/G2 configurations are frequently used with appropriate nicotine-salt e-liquid.

Uwell itself states that the 1.2Ω G2 Mesh coil works well with stronger salts, making it the clearest nicotine-salt-oriented option in the family.

The correct nicotine concentration depends on personal requirements and the amount of vapour produced.

The coil itself contains no nicotine.

Freebase Compatibility

Suitable freebase e-liquid can also be used.

The 0.8Ω coil is often chosen for a more open, higher-vapour configuration, while the 1.0Ω and 1.2Ω options move progressively toward tighter MTL use.

Always make sure the e-liquid viscosity is suitable for the pod and coil.

How Long Does a Caliburn G2 Coil Last?

Uwell does not provide one universal guaranteed number of days for these coils.

Actual lifespan depends on:

• E-liquid sweetness

• Liquid viscosity

• Daily consumption

• Puff duration

• Airflow

• Coil priming

• Resistance

• Device output

Very sweet e-liquid can leave more residue on a heating surface and reduce usable coil life more quickly.

Replace the coil according to performance rather than assuming every coil will last the same number of days.

Signs the Coil Needs Replacing

A CALIBURN G/G2 coil may need replacement when you consistently notice:

• Burnt taste

• Significant flavour reduction

• Weak vapour

• Poor e-liquid absorption

• Persistent flooding

• Unusual performance despite enough liquid

Before replacing the complete pod, remember that the G2 cartridge is designed to accept a separately replaceable coil.

Preventing Early Burnt Coils

Useful practices include:

• Prime every new coil

• Keep enough e-liquid in the pod

• Avoid chain vaping when the wick cannot keep up

• Use an appropriate liquid viscosity

• Keep output within an appropriate range

• Replace heavily worn coils

• Do not continue using a persistent burnt coil

For adjustable devices such as CALIBURN X, staying within a suitable output for the installed coil is especially important because the X allows manual 5–20W adjustment.

Why Can a New Coil Leak?

Leaks immediately after coil installation may occur when the replacement coil is not seated correctly.

Uwell's original CALIBURN G instructions specifically state that the coil must be aligned with the locating slot on the pod during installation.

Other possible causes include:

• Damaged coil seal

• Damaged pod

• Overfilling

• Condensation

• Incorrect coil seating

Push the replacement coil fully into position before refilling.

Storage in UAE Conditions

Keep replacement coils:

• In their original packaging until needed

• Away from children and pets

• Away from water

• Away from direct sunlight

• Away from excessive heat

• In a clean, dry location

Filled cartridges should not be left for prolonged periods in a hot parked vehicle because high temperatures can change e-liquid viscosity and increase the likelihood of leaking.

How to Check Uwell Authenticity

Uwell provides an official Authentication service directly through its support system. The authentication option is linked from Uwell's official CALIBURN product pages.

For replacement coils:

1. Keep the original retail package.

2. Locate the manufacturer's security information.

3. Follow the verification instructions printed on the box.

4. Use Uwell's official authentication service.

5. Avoid submitting product codes to unrelated third-party websites.

Authentication packaging can change between product generations, so follow the instructions on your actual coil package.

Who Are Uwell Caliburn G2 Replacement Coils For?

From a product-specification standpoint, Uwell Caliburn G2 Replacement Coils may be relevant to existing adult users who own compatible G/G2-family refillable devices and want:

• Replaceable coil heads

• 0.8Ω Mesh option

• 1.0Ω MTL option

• 1.2Ω G2 Mesh option

• MTL compatibility

• Restricted-DTL compatibility

• Press-fit installation

• Ability to reuse the pod

• Pro-FOCS-associated CALIBURN platform

• Multiple compatible CALIBURN devices

• 4-coil UAE packs

They are not the correct replacement for devices using newer CALIBURN G3 integrated cartridges.

Frequently Asked Questions

How many Uwell Caliburn G2 coils come in a pack?

Current UAE listings commonly sell 4 replacement coils per pack.

Which coil resistances are compatible with the Caliburn G2?

The compatible family includes:

• 0.8Ω CALIBURN G Mesh

• 1.0Ω CALIBURN G

• 1.2Ω CALIBURN G2 Mesh

Uwell officially confirms the G2's compatibility with the earlier 0.8Ω and 1.0Ω G coils.

Is the 0.8Ω coil a G2 coil?

Technically, Uwell names it the 0.8Ω CALIBURN G Coil, but it is officially compatible with the G2.

Is the 1.0Ω coil a G2 coil?

Uwell officially names it the 1.0Ω CALIBURN G Coil, but it is supported by G2-family devices.

Which one is the actual G2-branded coil?

The 1.2Ω UN2 Meshed version is officially branded the CALIBURN G2 Coil.

Is the 0.8Ω coil Mesh?

Yes. Uwell officially identifies it as a FeCrAl UN2 Meshed 0.8Ω CALIBURN G Coil.

Is the 1.2Ω coil Mesh?

Yes. It is officially a FeCrAl UN2 Meshed 1.2Ω CALIBURN G2 Coil.

Is the 1.0Ω coil Mesh?

Uwell's current official specifications list the 1.0Ω option simply as a FeCrAl CALIBURN G Coil, rather than an UN2 Meshed coil.

What wattage is recommended for the 0.8Ω coil?

Current replacement-coil listings commonly specify approximately 13–18W.

What wattage is recommended for the 1.0Ω coil?

Current listings commonly specify approximately 10–15W.

What wattage is recommended for the 1.2Ω G2 coil?

A current UAE listing specifies 9–13W, while some international sellers list approximately 8–12W. Follow the range printed on your physical coil box when there is a difference.

Which coil gives the most vapour?

The 0.8Ω option is the lower-resistance choice and Uwell specifically associates it with greater vapour production.

Which coil provides the tightest draw?

The 1.2Ω G2 Mesh coil is the highest-resistance option and is the clearest choice for tighter MTL operation.

Which coil is best for balanced MTL?

The 1.0Ω CALIBURN G Coil sits between the 0.8Ω and 1.2Ω resistances and is oriented toward tighter MTL use compared with 0.8Ω.

Can I use nicotine salt with these coils?

Yes, with an appropriate resistance and nicotine concentration. Uwell specifically states that its 1.2Ω G2 Mesh coil works well with stronger salt liquids.

Can I use freebase e-liquid?

Yes. Suitable freebase formulations can be used with compatible G/G2 coil setups.

What VG/PG ratio is suitable?

Current replacement-coil guidance commonly recommends 50/50 or higher-PG formulations for this low-power coil family.

Always check your e-liquid and device requirements.

Do these coils fit the Caliburn G2?

Yes.

Do they fit the Caliburn GK2?

Yes. Uwell officially lists 0.8Ω, 1.0Ω and 1.2Ω compatibility.

Do they fit the Caliburn X?

Yes. Uwell officially lists the same three coil options.

Do they fit the Caliburn GZ2?

Yes.

Do they fit the Caliburn Tenet?

Yes. The TENET officially supports the same three resistance options.

Do they fit the KOKO Prime?

The CALIBURN G 0.8Ω and 1.0Ω coils are directly supported, while Uwell's KOKO Prime Vision page also lists the 1.2Ω G2 coil as a separately sold option.

Do these coils fit Caliburn G3?

No. CALIBURN G3 uses a different integrated-coil cartridge platform.

Do I need to replace the pod when the coil burns out?

No, not if the compatible G2 pod itself remains undamaged. Remove the worn coil and install a new one.

Do the coils contain nicotine?

No. Replacement coil heads contain no e-liquid or nicotine.

Does e-liquid come with the coil pack?

No. E-liquid is purchased separately.

How should a new coil be installed?

Align the coil with the cartridge's locating slot and push it completely into position. Uwell specifically documents correct locating-slot alignment for this replaceable-coil family.

Uwell Caliburn G2 Replacement Coils in UAE

Uwell Caliburn G2 Replacement Coils in UAE provide a reusable-coil solution for the CALIBURN G/G2 cartridge platform, with 0.8Ω, 1.0Ω and 1.2Ω resistance options covering loose MTL, balanced MTL and tighter MTL configurations. Uwell officially identifies the 0.8Ω and 1.0Ω versions as CALIBURN G coils and the 1.2Ω Mesh version as the dedicated CALIBURN G2 coil.

Current UAE inventory commonly sells the replacement coils in a 4-piece pack. The 0.8Ω and 1.2Ω versions use Uwell's UN2 Meshed construction, while the 1.0Ω is officially listed as a standard FeCrAl CALIBURN G coil.

For an accurate UAE Shopify variant setup, use:

0.8Ω Mesh | 1.0Ω | 1.2Ω Mesh

with the key specification:

4 Coils Per Pack | Press-Fit | Replaceable Coil | G/G2 Platform

The coil family is officially supported across several Uwell devices including the CALIBURN G2, GK2, CALIBURN X, GZ2 and TENET, while the later G3 generation uses a different integrated-cartridge platform.

For adults aged 18+ only in the UAE. Replacement coils themselves contain no nicotine, but compatible e-liquids may contain nicotine. Nicotine is addictive. Keep coils, devices and e-liquids away from children and pets.